MPN: GB-TUNE-SS

Features:

• Low-profile design allows this gas block to fit inside most handguards
• Tunable gas block designed to perfectly tune your rifle
• Stainless steel tuning screws
• Includes roll pin, set screws, and wrench
• Made in U.S.A.

Specifications:

• Material: 303 Stainless Steel
• Finish: Raw Stainless Steel
• Length: 1"
• Height: 1.386"
• Width: 0.955"
• Weight: 1.9 oz.

Compatibility:

• AR-15 and AR-10 with .750" diameter barrel

Includes:

• 1x Odin Works Tunable Gas Block
• 2x Gas block set screws
• 2x Gas adjustment screws
• 1x Gas tube roll pin
• 3x Hex wrenches

Details:

When you’re putting together a dream rifle, there are a lot of options you’ll want to consider. If you’re building a low impulse, lightweight build, you’ll want to choose a quality gas block to help manage the pressure of your weapon system. You might be torn between the specific tunability of an adjustable gas block and a low profile gas block. Fortunately, The Odin Works Tunable Gas Block has brought the best of both worlds to the small arms market. This gas block is small enough to fit under many handguards and offers great adjustability.

Easy Gas Tuning

The Odin Works Adjustable Gas block is easy to use. Once installed, simply back out the set screw that holds the adjustment screw in place. Odin Works supplies the correct wrench in the package with the gas block so you don’t even have to hunt the proper tool. Remove the set screw to gain have access to the adjustment screw through the same hole. Turn the adjustment screw to the right to further restrict the flow of gas through the block or to the left to allow gas to flow more freely. Once you’ve tuned the gas flow for best performance, reinsert the set screw and snug it up against the adjustment screw to lock it in place.

Quality Construction

The Odin Works Tunable Gas Block is the same quality gas block that Odin Works ships all of their DI barrels with. The adjustable gas block is machined from U.S. sourced 303 stainless steel. It ships complete with a roll pin, set screws, and the wrench you’ll need to adjust it. In addition to Odin Works barrels, the Low Profile Gas Block will fit your favorite 0.750-inch barrels from other manufacturers. This is the gas block you’ve been looking for.